24A-D Series Parallel Shaft DC Gearmotor Model N4492

24A-D Series Parallel Shaft DC Gearmotor Model N4492
Standard Features
  • 24A Motor provides high starting torque, adjustable speed, and predictable performance under a range of operating conditions.
  • Unvented gearhousing.
  • Industrial lip type seals on motor and output shafts.
  • Needle bearing on output shaft for increased radial load capacity and long life.
  • Permanently lubricated gearing utilizing oil for long life.
  • Reinforced thermoplastic helical gear on input stage for quietness and hardened steel spur gears on subsequent stages for high output torque and long life.
  • Helical pinion accurately cut on motor shaft for maximum strength and minimum noise.
Application Information
  • Performance ratings of 130V models are based on use with filtered controls.
  • Face mount is standard.
Optional Accessories
  • Encoder model 0940.
  • "L" bracket mount kit model 5968.
Matching Controls
  • We stock a full line of speed controls for our PMDC motors.
Model Number N4492
Category 24A-D Parallel Shaft DC Gearmotor
Speed (rpm) 208
Rated Torque (lb-in) 7.1
Amps (24V Winding) 1.8
Amps (130V Winding) 0.3
Peak Torque (lb-in) 38
Motor HP 1/29
Gear Ratio 12
Radial Load (lbs) 65
Length XH (inch) 5.97
Weight (lbs) 4
Product Type 24A2BEPM-D3
Winding 130V
Accessory Shaft YES
Connection Diagram 074 10101  

MC Supply Co., Inc.    |    Contact us at: Info@MCSupplyco.com   |  Toll Free: (800) 784-4660 
Website by