Pacesetter 48R-5H Right Angle AC Inverter Duty Gearmotor

Pacesetter 48R-5H Right Angle AC Inverter Duty Gearmotor
Product Features
  • Quintsulation™ 5-stage insulation system designed to meet NEMA MG 1-1993, Section IV, Part 31.
  • 230VAC, 60 Hz, 3-phase and/or 230/460VAC, 60Hz, 3-phase for operation with a wide range of inverter products.
  • Inverter-Grade magnet wire and Class 'F' insulation system for increased protection against spikes and corona damage caused by the inverter.
  • All new optimized motor and gearhead combinations for maximum output power in the smallest package.
  • UL recognized for construction, CSA certified, and in compliance with the Low Voltage Directive 'CE'.
Standard Features
  • Rugged gearhead designed for heavy continuous loads with ample strength for shock loads.
  • Industrial lip type seals on motor and output shaft.
  • Ball bearing on output shaft for high radial and axial load capacity.
  • Permanently lubricated with high-performance synthetic lubricant.
  • Bronze gear for high shock load capability.
  • Hardened and ground worm for strength and long life.
Application Information
  • Mounting feet are located on gearhead.
Optional Accessories
  • Die cast terminal box kit model 0984,1984 achieves IP-44 rating.
Matching Controls
Custom Shaft Configurations
Can be special-ordered with a hallow shaft configuration.

Models
Model numbers that begin with an 'N' require lead time and minimum order quantities.
Speed
Rpm
Motor
Torque
(lb-in)
Motor
Hp
Gear
Ratio
Product
Type
Model
Number
Three-Phase, Inverter Duty, Non-Synchronous Motor (TEFC), 230VAC
35 296 3/4 48 48R6BFPP-5H N2280
47 285 3/4 36 48R6BFPP-5H 2281
94 256 3/4 18 48R6BFPP-5H N2282
170 178 3/4 10 48R6BFPP-5H N2283

MC Supply Co., Inc.    |    Contact us at: Info@MCSupplyco.com   |  Toll Free: (800) 784-4660 
Website by
TrueZeal.com
.net