K-2 Series Parallel Shaft AC Gearmotor Model 0750

K-2 Series Parallel Shaft AC Gearmotor Model 0750
Standard Features
  • Totally enclosed, non-ventilated IP-20 rating.
  • Permanently lubricated, noise tested ball bearings.
  • Three-wire winding simplifies reversing circuitry.
  • Impedance protected to prevent current overload (gearmotor should not be stalled when powered up). Contact us for specific gear ratios.
  • Three winding types are available.
  • Permanently lubricated gearing utilizing grease.
  • Helical pinion accurately cut on motor shaft for maximum strength and minimum noise.
  • Non-metallic helical primary gear for quietness.
  • Steel helical gearing on subsequent stages for quietness and high strength.
Application Information
  • Capacitor is included with motor.
  • Face mounting is standard.
Specifications
Model Number 0750
Category Permanent Split Capacitor, High Slip, Non-Synchronous
Speed (rpm) 20
Rated Torque (oz-in) 80
Motor HP 1/450
Volts 115
Hz 60
Phases 1
Amps 0.1
Gear Ratio 60
Radial Load (lbs) 20
Length XH (inch) 3.02
Weight (lbs) 2.7
Connection Diagram 074 10019
Capacitor Part Number 49400047 (included)
Product Type KCI-24T3

MC Supply Co., Inc.    |    Contact us at: Info@MCSupplyco.com   |  Toll Free: (800) 784-4660 
Website by
TrueZeal.com
.net