33A-W Series Parallel Shaft DC Gearmotor

33A-W Series Parallel Shaft DC Gearmotor
Standard Features
  • 33A Motor provides high starting torque, adjustable speed, and predictable performance under a range of operating conditions.
  • Unvented gearhousing.
  • Industrial lip type seals on motor and output shafts.
  • Needle bearing on output shaft for increased radial load capacity and long life.
  • Permanently lubricated gearing utilizing semi-fluid grease for long life.
  • Wide reinforced thermoplastic helical gear on input stage for quietness and wide hardened steel spur gears on subsequent stages for high output torque and long life.
  • Helical pinion accurately cut on motor shaft for maximum strength and minimum noise.
Application Information
  • Performance ratings of 130V models are based on use with filtered controls.
  • Face mount is standard.
Optional Accessories
  • Encoder model 0941.
  • Brake model 0997.
  • IP-44 achieved with terminal box model 0984 or 1984.
  • 'L' bracket kit model 0970.
  • Adaptor plate kit model 0995 provides for drop in replacement of competitive gearmotors.
Matching Controls
  • We stock a full line of speed controls for our PMDC motors.
Models
Model numbers that begin with an 'N' require lead time and minimum order quantities.

Model Number
24 Volt Winding 130 Volt Winding
Speed
(Rpm)
Rated
Torque
(lb-in)
Motor
Hp
Gear
Ratio
Product
Type
Accessory
Shaft
No
Accessory
Shaft
Accessory
Shaft
No
Accessory
Shaft
8 175 1/12 312.4 33A3BEPM-W4 N6947 6647 N6547 6147
15 166 1/12 172.1 33A3BEPM-W4 N6946 N6646 N6546 6146
26 155 1/8 97.5 33A5BEPM-W4 N6956 6656 N6556 6156
38 143 1/8 65.5 33A5BEPM-W3 N6955 N6655 N6555 6155
57 96 1/8 43.9 33A5BEPM-W3 N6954 6654 N6554 6154
84 65 1/8 29.7 33A5BEPM-W3 N6953 N6653 N6553 6153
123 46 1/8 20.4 33A5BEPM-W2 N6952 N6652 N6552 6152
181 31 1/8 13.8 33A5BEPM-W2 N6951 N6651 N6551 6151
266 21 1/8 9.4 33A5BEPM-W2 N6950 N6650 N6550 6150
456 12 1/8 5.5 33A5BEPM-W2 N6949 N6649 N6549 6149
660 6 1/8 3.8 33A5BEPM-W2 N6948 N6648 N6548 6148
Shown with optional 'L' bracket Model 0970
'S' (4) 1/4-28 UNF-2B, 0.5 in. deep minimum on a 4.78' bolt circle
'F' See accessory ready mounting dimension

MC Supply Co., Inc.    |    Contact us at: Info@MCSupplyco.com   |  Toll Free: (800) 784-4660 
Website by
TrueZeal.com
.net