QUICK SELECTION CHARTS

IP-65 Mid BG3 Series In-line

IP-65 Construction: Stainless shaft or hollow bore combined with electrocoated aluminum housing, fan shaft seal, sealed terminal box, and "O" ring housing seals provide superior resistance to withstand harsh wet environments. In-line, Mid BG3 Gearing: All hardened steel, CBN ground Helical gearing! Provides quiet operation, superior shock load resistance compared to competitive models using spur type gears. Bearings: Premium ball bearings provide efficient torque transfer and good overhung load capacity. Lubricant: High-grade synthetic grease is factory filled to proper level. No expansion bladder required! Shaft seals: Quality NBR rubber, spring set lip type seals provide good wear resistance over a wide temperature range. Housing seals: Machine slip fit "O" rings are used. Leaky compressed gaskets are not used! Mounting: Any angle, any direction, full warranty! No breather or oil plugs are required. Housing: Precision die cast aluminum, coated using an electrocoat process for superior resistance to industrial environments. Third Party: All standard voltages are UL, Cul (CSA), and CE marked.

Mid BG3 Gearing: 100% Hardened steel Hypoid/Helical gearing

BG3 In-Line Mid Series Torque Table (in-lb)

Ratio		RPM	1/8 Hp		1/4 Hp		1/2 Hp		1 Hp		2 Hp		3 Hp
X:1	Code		Frame	Torque	Frame	Torque	Frame	Torque	Frame	Torque	Frame	Torque	Frame	Torque
5	005	360	18	22.5	18	45	22	89	28	167	32	338	40	494
10	010	180		44		89		178		335		668		980
15	015	120		67		134		268		506		1006		1474
20	020	90		86.7		178		357		669		1335		1959
25	025	72		113		223		446		837		1673		2454
30	030	60		130	22	268	28	535	32	1004	40	2003	50	2939
40	040	45		173		346		691		1296		2592		3797
50	050	36		217		432		864		1620		3234		4751
60	060	30	22	260		519		1037		1944		3884		5696
80	080	22.5		346		691		1383		2593		5176		7595
100	100	18		432	28	864	32	1728	40	3241	50	6476		9537
120	120	15		519		1037		2074		3889		7768
160	160	11.2		691		1383		2765		5185		10317
200	200	9		864		1728		3457		6481		10838
300	300	6	28	1155	32	2311	40	4621	50	8665
375	375	4.8		1444		2888		5777		10832
450	450	4		1733		3466		6770		10850
600	600	3	32	2311	40	4621	50	9243
750	750	2.4		2888		5777		10850
900	900	2		3466		6770		10850
1200	12X	1.5		3819		6770		10850

Part Number Building Charts


Mid In-Line Part Numbers

BG3	L	M	18	020	T	K	4	A
Type	Mounting	Motor	Frame	Ratio Code	Phase	Hp	Voltage	Connection
In-line	K: Flange L: Foot	M: Motor W: IP-65 B: Brakemotor J: Man. Rel. Brake C: 56C Reducer	See Tables	See Tables	T: 3 Ph S: 1 Ph	1/8: H 1/4: K 1/2: L 1: M 2: P 3: R	Single Phase 1: 115V 5: 220V 6: 230V 7: Special OEM Three Phase 4: 208/230/460V 8: Special OEM	3 Ph 1/8~1/2 Hp A: Alum. Box 3 Ph 1~3 Hp S: Steel Box 1 Ph 1/8~1/4 Hp A: Alum. Box N: Lead wires 1 Ph 1/2 Hp S: Steel Box N: Lead wires
1. Frame, Gear Ratio Code, and Horsepower Code must match in the ratings tables. 2. The Phase code (T or S) must match the Voltage code.

Copyright © 2004 Brother International Corporation. All Rights Reserved.