IP-44 Mid BH2 Series Rt-angle

 

QUICK SELECTION CHARTS

IP-44 Mid BH2Series Rt-angle 

Rt-angle, Mid BH2 Gearing:
All hardened steel, CBN ground Hypoid / Helical combination! Provides superior life, cooler operation, and compact size compared to competitive soft bronze worm gearing.

Bearings:
Premium ball bearings provide efficient torque transfer and good overhung load capacity.

Lubricant:
High-grade synthetic grease is factory filled to proper level. No expansion bladder required!

Shaft seals:
Quality NBR rubber, spring set lip type seals provide good wear resistance over a wide temperature range.

Housing seals:
Machine slip fit 'O' rings are used. Leaky compressed gaskets are not used!

Mounting:
Any angle, any direction, full warranty! No breather or oil plugs are required.

Housing:
Precision die cast aluminum, coated using an electrocoat process for superior resistance to industrial environments.

Third Party:
All standard voltages are UL, Cul (CSA), and CE marked.




Mid BH2
Gearing: 100% Hardened steel Hypoid/Helical gearing
Hypoid gearing is up to 80% more efficient than competitive worm gears. The Brother all steel Hypoid/Helical combination has much better wear properties than softer bronze worm gearing. Brother Hypoid gearmotors last longer!












BH2 Right-angle Mid Series Torque Table (in-lb)

Ratio RPM 1/8 Hp 1/4 Hp 1/2 Hp 1 Hp 2 Hp 3 Hp
X:1 Code Frame Torque Frame Torque Frame Torque Frame Torque Frame Torque Frame Torque
5 005 360 22 21 22 42 28 85 32 159 40 321 50 468
10 010 180 42 85 169 317 633 928
15 015 120 63 127 254 476 954 1396
20 020 90 85 169 338 634 1266 1855
25 025 72 106 211 423 793 1587 2324
30 030 60 127 254 507 951 1899 2783
40 040 45 169 338 676 1268 2454 3563
50 050 36 211 423 845 1585 3061 4491
60 060 30 254 507 1014 1902 3676 5384
80 080 22.5 328 28 654 32 1308 40 2452 50 4899 7187
100 100 18 410 817 1634 3065 6121 9017
120 120 15 491 981 1961 3677 7343 10751
160 160 11.2 655 1308 2615 4903 9797
200 200 9 819 1634 3269 6129 10838
240 240 7.5 983 1961 3819 6770 10838
300 300 6 28 1069 32 2170 40 4227 50 7926
375 375 4.8 1336 2712 5284 9908
450 450 4 1603 3255 6341 10850
600 600 3 32 2113 40 4339 50 8455
750 750 2.4 2642 5424 10568
900 900 2 3170 6509 10850
1200 12X 1.5 3819 6770 10850
1500 15X 1.2 3819 6770 10850


Part Number Building Charts


Mid Rt-Angle Part Numbers

BH2 L M 22 R 020 T K 4 A
Type Mounting Motor Frame Shaft Ratio Code Phase Hp Voltage Connection
Rt-angle F: Flange
L: Foot 		M: Motor
W: IP-65
B: Brakemotor
J: Man. Rel. Brake
C: 56C Reducer 		See Tables L: Left
R: Right
T: Double 		See Tables T: 3 Ph
S: 1 Ph 		1/8: H
1/4: K
1/2: L
1: M
2: P
3: R 		Single Phase
1: 115V
5: 220V
6: 230V
7: Special OEM
Three Phase
4: 208/230/460V
8: Special OEM 		3 Ph 1/8~1/2 Hp
A: Alum. Box
3 Ph 1~3 Hp
S: Steel Box
1 Ph 1/8~1/4 Hp
A: Alum. Box
N: Lead wires
1 Ph 1/2 Hp
S: Steel Box
N: Lead wires
1. Frame, Gear Ratio Code, and Horsepower Code must match in the ratings tables.
2. The Phase code (T or S) must match the Voltage code.


Copyright © 2004 Brother International Corporation. All Rights Reserved.
MC Supply Co., Inc.    |    Contact us at: Info@MCSupplyco.com   |  Toll Free: (800) 784-4660 
Website by
TrueZeal.com .net